Motel furniture is constructed
of 3/4" Meleface material with 1-sided or 2-sided finish as needed.
Meleface is thermal fused particle board with a hard surface finish
next to a laminate finish. All tops are done in high pressure laminate
to match existing sidewalls, which makes them highly scratch resistant.
1 1/2" pocketscrews
and glue are used to construct all cabinets: no staples or nails. The
cabinets have 3/4" x 1 1/2" oak face frames with rounded edges.
Dakota Woodworking, Inc. finishes all it's products in a post catalyzed,
high solids, high performance amino alkyd. This offers exceptional
resistance to water, household chemicals, and wear. When used over
our high performance stains we produce outstanding depth clarity and
aesthetics in our finishes. All face frames are glued and
hand clamped, thus making the bonding secure, and the edges even and
consistent. Cabinet bottoms which will be exposed to any kind of moisture,
such as carpet shampoo or spilled liquids, are banded to protect from
swelling. Drawers feature 1/4" bottoms grooved into the sides.
Drawer slides are 14" KV #1286 with ball bearings and are virtually
Our shop consists of all
up to date and well maintained machinery and is well equipped to complete
the average 45-50 room motel in approximately 3-4 weeks. When shipped,
furniture is wrapped in blankets or foam, therefore no cartons need
to be opened or disposed of during unloading.
Pionite, Wilsonart, or Nevamar Products
Oak or Maple
Exposed - Oak or Maple
Non-exposed Furniture Northern Red Oak or Hard White Maple
Amerock Antique English #152-AE/Burnished Brass #3425-BB, or to owners
All exposed solids are Oak or Maple
All non-exposed solids are Furniture Grade Northern Red Oak or Hard
All panels are Oak or Maple veneers
High Pressure Laminate on Contract Grade Flake Core with minimum density
equal to 45 pounds. Prefinished thermalfused coat on underside for moisture
resistance. Desks, credenzas, TV Armoires, Night Stands and Luggage
Benches consist of 1 1/2" Hardwood White Maple or Northern Red Oak.
Pionite, Wilsonart, Nevamar Products
Contract Grade Flake Core, minimum density of 45 pounds, made up with
a 3 ply Veneered Panel, which is PVC banded to avoid moisture. All fronts
are covered with 1 1/2" Furniture Grade Hard White Maple or
Northern Red Oak.
Drawer Front Specifications
Drawer fronts are 3/4" thick solid oak with styled edges (raised
panel or 3-D effect) and decorative V-grooves for added appearance.
Hardware is Brass #3425
B-B or to owners specifications.
Drawer Box Specifications
Wood grain 1/2" high density thermal fused western core particle
board serves as sides with matching pvc on top and bottom edges to prevent
moister absorption. Matching prefinished wood grain 1/4" meleface
is used for bottoms. Bottoms are grooved, glued, and stapled into all
four sides. Sides are fastened together with dowels and have a proven
record of 13 years of maintenance free use. Drawer slides with a 75
pound test rating, peel resistant and positive stops are used.
Kick Rail and Return Rails
Hard White Maple or
Northern Red Oak conformed for durability and appearance and
mitered using a butt joint.
Back Panels Specifications
Back Panels on TV Amoires and Night Stands are 1/4" pre-finished
matching wood grain melemine on MDF board, which is grooved and stapled
into side walls. On Desks, Credenzas, Luggage Racks and Dressers, the backs
are 3/4" contract Grade Flake Core minimum density of 45 pounds
made up of 3 Ply Veenered Panel, which is glued and pocket screwed (1
1/2" square drive course threaded screws) into place for a maximum
support and endurance.
Doors where required are all 3/4" thick Solid Red Oak or Hard
White Maple with raised
panel effect. Edges are contoured to give added appearance and accept
a 1/2" overlay hinge #7550-BB and BB pull #3425.
32 mm panels are fastened with corner blocks and glued and 1 1/2"
square drive course thread pocket screws to provide the utmost long
lasting support and durability needed to survive the public abuse. Panels
are always run the full depth of the cabinet, be it top, back, or bottom
for the most stability.
All face frames are run through a five step wide overhead system using
80, 120, 150, 180, and finally 240 grit belt to eliminate all scratches
or wood indentations. Frames are then given two coats of stain and two
coats of lacquer for long time durability. All liquids are Contract
Activity or Parson Tables have 2 1/4" x 2 1/4" solid oak legs
held together by a 3 1/2" solid oak rail then pocket screwed and
glued into place. Corner blocks add to its rigid form and stability.
Headboards are 3/4" thick Contract Grade Flake Core with 3 ply
Veneer. Northern Solid Red Oak or Hard White Maple ranging from 1 1/2" - 2 1/4"
surrounds three sides of the headboard with extra molding on top for
the crown mold look. All Mirror Frames consist of Northern Red Oak or
Hard White Maple.
Crown Molds are all solid oak. Frames are wall mounted with self hanging
back to top
| Products | Contact | Photo Gallery